Introduction to Plastic dryer
Plastic dryer is a device used to remove moisture from plastic raw materials. It is widely used in the plastic processing industry, such as injection molding, extrusion production, blow molding production, etc. The plastic dryer quickly removes moisture through the heating and ventilation system to ensure that the plastic raw materials reach the ideal dry state before processing, thereby improving product quality and production efficiency.
Features of Plastic dryer
1. Интеллектуальная функция
Automated operation: Equipped with an intelligent control system, it supports one-button start, temperature adjustment, fault alarm and other functions to reduce the difficulty and cost of manual operation.
PID temperature control technology: Precisely control the drying temperature to avoid damage to the raw materials caused by excessively high or low temperatures, and ensure stable drying effects.
2. Высококачественные материалы
All stainless steel design: The raw material contact surface is made of stainless steel, which is corrosion-resistant and anti-aging, avoids raw material contamination, and extends the service life of the equipment.
Precision die-cast shell: The shell is made of aluminum alloy, with a smooth surface, excellent thermal insulation performance, and good durability.
3. Гуманизированный дизайн
Separate structure: The barrel body and the base can be separated, which is convenient for cleaning and maintenance, and reduces downtime.
Visual window: Equipped with a transparent viewing window, the internal working conditions can be observed in real time, which is convenient for monitoring the drying process.
Технические параметры
| Модель | G25KG | G50KG | G75KG | G100KG | G150KG | G200KG | G300KG | G400KG | G500KG | G600KG | G800KG | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hopper Capacity | кг | 25 | 50 | 75 | 100 | 150 | 200 | 300 | 400 | 500 | 600 | 800 | |
| Blower Power | w | 122 | 157 | 246 | 246 | 350 | 350 | 400 | 400 | 750 | 1000 | 2000 | |
| Heating Capacity | kW | 3.8 | 4.5 | 5.5 | 7 | 9 | 12 | 15 | 18 | 20 | 22 | 24 | |
| drying Temperature | 125℃ | ||||||||||||
| Barrel Diameter | мм | Ф350 | Ф430 | Ф468 | Ф550 | Ф630 | Ф700 | Ф750 | Ф800 | Ф800 | Ф990 | Ф1090 | |
| Dimensions(mm) | L | 795 | 880 | 1020 | 1080 | 1120 | 1250 | 1300 | 1400 | 1450 | 1600 | 1700 | |
| w | 465 | 590 | 620 | 700 | 760 | 850 | 920 | 1040 | 1100 | 1150 | 1330 | ||
| H | 780 | 965 | 1055 | 1250 | 1370 | 1480 | 1740 | 1760 | 1800 | 2150 | 2660 | ||
| Вес | KG | 34 | 38 | 48 | 59 | 78 | 110 | 152 | 170 | 210 | 280 | 380 | |
Benefits of Plastic dryer
1. Reduce power consumption and cost
Energy-saving design: The hot air circulation technology and insulation layer design are adopted, and the energy saving rate is as high as 30%-40%, which significantly reduces the electricity cost of the enterprise.
Efficient drying: A large amount of plastic raw materials can be dried in a short time, improving production efficiency and reducing energy waste.
2. Improve product quality
Uniform drying: The hot air is evenly distributed to ensure that each plastic raw material can be fully dried to avoid product defects caused by residual moisture.
Reduce the defective rate: Through precise temperature control and automated operation, the defective rate in production can be effectively reduced and the product qualification rate can be improved.
3. Safety and environmental protection
Over-temperature alarm function: Built-in safety protection mechanism to avoid overheating of equipment and ensure the safety of operators.
Reduce pollution: Stainless steel material and sealing design to prevent raw material contamination and meet environmental protection requirements.
Detials
Сценарии применения
Plastic dryers are suitable for a variety of plastic processing scenarios, including:
Литье под давлением: Ensure that the plastic raw materials are completely dry before injection molding to avoid defects such as bubbles and silver wires in the products.
Extrusion molding: Used to produce pipes, plates, films and other products to reduce bubbles and impurities in the products.
Выдувное формование: Suitable for the production of hollow plastic products to ensure that the wall thickness of the products is uniform and the surface is smooth.
Plastic recycling: Dry the recycled plastics to improve the utilization rate of recycled materials.
ЧАСТО ЗАДАВАЕМЫЕ ВОПРОСЫ
1. How to adjust the drying temperature of the plastic dryer?
A: Set the target temperature through the control panel, and the built-in PID temperature control system of the equipment will automatically adjust the heating power to ensure that the temperature is stable within the set range.
2. Does the equipment need regular maintenance?
A: Yes, it is recommended to regularly clean the residue inside the barrel and check the working status of the heating system and ventilation system to ensure long-term stable operation of the equipment.
3. What plastic raw materials are suitable for plastic dryers?
A: It is suitable for a variety of plastic raw materials, such as PET, PC, PA, ABS, etc. The specific drying temperature can be adjusted according to the characteristics of the raw materials.
4. How is the energy-saving effect of the equipment?
A: With the hot air circulation and insulation layer design, the energy saving rate can reach 30%-40%, significantly reducing the electricity cost of the enterprise.
Russian 
English 
Spanish 
Portuguese 
French 
Arabic 
Japanese 
German